Configure a Pneumatic
Conveying Bend Enquiry

Start with the Application

You do not need to know every technical parameter before contacting us. Choose the product family that interests you, supply known dimensions and mark unknown items clearly. If you are unsure whether a pocket, sweep, segmented or wear-resistant design is appropriate, describe the material and problem first.

1. Select Product Family

The pocket-type cast family has flanged connections and 45°/90° flow deflections. The five pipe-based families have 30°/45°/90° and can be discussed with straight pipe or flanged ends. The nominal program is DN50–DN300 for pockets and DN50–DN400 for pipe-based families.

2. Select DN / NPS and Bend Angle

Record nominal DN, actual OD, wall thickness and finished bore where known. A nominal label alone is not enough to establish pipe fit. If the customer drawing uses NPS, identify it and keep the associated pipe schedule.

3. Select CLR for Pipe Types or Pocket Geometry

Pipe-bend options start from the provisional fixed-radius schedule. Choosing one of these values does not constitute an order confirmation: the bend radius must be approved for the actual material, thickness, liner and manufacturing process. Pocket elbows instead use model-specific face-to-center offsets and installation envelope.

4. Select Body Material and Wear Protection

Choose the intended carbon or stainless steel pipe, or an eligible cast metal for a pocket model. For lined or hardfaced elbows, also state coating/liner requirements and the minimum clear bore. A qualified technical offer will identify exact grades and protective-layer specifications.

5. Choose DIN/ANSI Flanged or Straight Pipe Ends

For flanged designs, provide the actual EN/DIN or ANSI/ASME standard, size, facing, bolt pattern and other required connection data. For straight ends, provide OD, wall and preferred end preparation. Identify each end separately when necessary.

6. Enter Process Conditions

Key inputs include material name and particle size, solids throughput, conveying mode, gas conditions, pressure/vacuum, temperature, installation orientation and the problem to solve. For a replacement, provide current service life, wear photos and the adjacent pipe drawing.

7. Upload Drawings and Photographs

A dimensioned sketch, image of the existing elbow or marked-up installation drawing can significantly improve the review. Mark confidential project information clearly. File upload is disabled in this local static preview; an approved WordPress implementation must handle secure uploads and notification delivery.

8. Contact Details and Submit

Application TypeNew installationReplacement or retrofitTroubleshooting or performance issueGeneral technical enquiry

Material and Application Details0 / 5000

PrefixMr.Mrs.Ms.Mx.MissDr.Prof.

First Name *

Middle Name

Last Name *

Email Address *

Phone Number *

Drawings and PhotosUpload drawings, route sketches, flange dimensions or wear photographs.

Choose FileNo file chosenDelete uploaded file

Request Quote

Important: This form is for content and interface approval only. It does not transmit personal information, submit an order or create a verified quotation. The final technical configuration and operating envelope are established by an approved offer and drawings.